Vapor Separator Draining - TOHATSU BFT 2000A Owner's Manual

Table of Contents

Advertisement

STORAGE

Vapor Separator Draining

Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death. Do
not smoke or allow flames or
sparks in your working area.
KEEP OUT OF REACH OF
CHILDREN.
• Be careful not to spill fuel.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled, make
sure the area is dry before
storing or transporting the
outboard motor.
• Do not smoke or allow flames or
sparks where fuel is drained or
stored.
104
VAPOR SEPARATOR
DRAIN TUBE
DRAIN BOLT
1. Unhook the drain tube from the
clip on the lower left of the head
cover.
2. Set the end of the tube toward the
outside of the engine undercase.
3. Loosen the vapor separator drain
bolt by using a commercially
available flat tip screwdriver.
CLIP
4. Tilt up the outboard motor.
5. Tilt down the outboard motor, and
drain the vapor separator.
6. After draining thoroughly, tighten
the drain bolt securely.
7. Clip the drain tube on the head
cover.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 225aBft 200a

Table of Contents