DAEWOO V–121 BL4
DOOR LOCK CYLINDER
Removal Procedure
1.
Remove the door seal trim. Refer to"Door Seal
Trim" in this section.
2.
Disconnect the outside door handle lock rod.
3.
Remove the retaining clip and the lock cylinder.
Installation Procedure
1.
Install the lock cylinder with the retaining clip.
2.
Connect the outside door handle lock rod.
3.
Install the door seal trim. Refer to"Door Seal Trim"
in this section.
POWER FRONT WINDOW
REGULATOR
Removal Procedure
1.
Disconnect the negative battery cable.
2.
Remove the front door glass. Refer to Section 9L,
Glass and Mirrors.
3.
Disconnect the electrical connector.
DOORS 9P – 21