Overview; Purpose Of Service Manual - GE LOGIQ S7 Expert Service Manual

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
Chapter 1
Introduction
Section 1-1

Overview

1-1-1 Purpose of Chapter 1
This chapter describes important issues related to safely servicing the LOGIQ™ S7 ultrasound system.
The service provider must read and understand all the information presented in this manual before
installing or servicing a unit.
Table 1-1
Section
1-1
1-2
1-3
1-4
1-5
1-1-2

Purpose of Service Manual

This Service Manual is valid for LOGIQ™ S7 ultrasound systems.
NOTICE
!! NOTICE:
This Service Manual provides installation and service information for LOGIQ™ S7 Ultrasound Scanning
System and contains the following chapters:
1.) Chapter 1 -
2.) Chapter 2 - Site
3.) Chapter 3 - Setup
4.) Chapter 4 - Functional
installation, or as required during servicing and periodic maintenance.
5.) Chapter 5 - Components and Functions
explanations of the electronics.
6.) Chapter 6 - Service
7.) Chapter 7 -
routines.
8.) Chapter 8 - Replacement
procedures for all changeable Field Replaceable Units (FRU).
9.) Chapter 9 - Renewal
10.)Chapter 10 - Care &
3 DRAFT (J
Contents in Chapter 1
Overview
Important Conventions
Safety Considerations
Electromagnetic Compatibility (EMC)
Customer Assistance
Introduction: Contains a content summary and warnings.
Preparation: Contains pre-installation requirements.
Instructions: Contains setup and installation procedures.
Checks: Contains functional checks that are recommended as part of the
Adjustments: Contains instructions on how to make available adjustments.
Diagnostics/Troubleshooting: Provides procedures for running diagnostic or related
Procedures: Provides disassembly procedures and reassembly
Parts: Contains a complete list of field replaceable parts.
Maintenance: Provides periodic maintenance procedures.
Chapter 1 - Introduction
25, 2014)
UNE
Description
(Theory): Contains block diagrams and functional
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL
Page Number
1-1
1-3
1-7
1-13
1-14
1-1