Sleep Mode Check (R2.X.x Or Later) - GE LOGIQ S7 Expert Service Manual

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
4-3-3-3

Sleep Mode Check (R2.x.x or later)

NOTE: This procedure assumes systems is already up and running.
1.)To going into the sleep mode, enter the scan screen and lightly press the Power On/Off switch (see:
Figure
3 DRAFT (J
4-13) once. The System-Exit window is displayed.
Figure 4-13 Power OFF User Interface (R2.x.x or later)
Chapter 4 - Functional Checks
25, 2014)
UNE
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL
4-14