Replacement Of Key Caps (By Special Native Language Keys) - GE LOGIQ S7 Expert Service Manual

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
Section 8-15

Replacement of Key Caps (by special native language keys)

8-15-1 Manpower
One person, 30 minutes.
8-15-2 Tools
• Regular Phillips screwdriver
• A/N key assembly removal tool (shipped with AN keyboard)
• Screwdriver (Diameter : 3mm)
8-15-3 Preparations
1.) Power Off/Shutdown the system.
Before you replace the boards, please make sure you wear the Ground strap, which prevents
CAUTION
ESD problems just in case.
!! CAUTION:
3 DRAFT (J
Tool A, and Tool B
Figure 8-59
Chapter 8 - Replacement Procedures
25, 2014)
UNE
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL
8-65