Initializing Eeprom - GE LOGIQ S7 Expert Service Manual

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
4.) Note : If following windows pop up without changing any parameters (i.e. simply browsing through
the VPD contents), then press "NO" before continuing.
8-21-6-2

Initializing EEPROM

When a new EEPROM is attached to a system, it will require initialization.
1.) Select "COMEXPRESS" from Device Grid (right pane) .
2.) Select "Load Template" from right pane.
3.) Select "ComexpMaster.VPD".
File is found under c:\Scanner\target\resources\acquisition\Housekeeping.
3 DRAFT (J
Figure 8-110 Question windows
Figure 8-111 COMEXPRESS
Figure 8-112 Load Tmplate
Chapter 8 - Replacement Procedures
25, 2014)
UNE
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL
8-99