GE LOGIQ S7 Expert Service Manual page 251

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
11.)A confirmation window appnears, and then hit the Enter key.
12.)Approx. 20 minutes later, loading the software will be completed.
13.)Remove Base System Software DVD, and type "exit" to reboot the system.
14.)At the first system reboot after loading the software, the OS will reboot the system automatically.
15.)After the reboot, the installation of system (Windows Embedded Standard 7) will be fully completed.
16.)Go to BIOS mode (Refer to the procedure 2.) 3.) above.)
3 DRAFT (J
Chapter 8 - Replacement Procedures
25, 2014)
UNE
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL
8-23