Removal Procedure - Op Panel Main Pwa Assy - GE LOGIQ S7 Expert Service Manual

GE H RAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
8-13-3-8

Removal Procedure - OP Panel Main PWA Assy

1.) Remove knobs from OPIO.
2.) Disconnect 7 cables marked
3.) Remove 27 screws around PWA board.
4.) Slowly lift board from OP Panel.
8-13-3-9 Removal Procedure - Joystick Assy
1.) Disconnect 2 cables marked
2.) Remove 3 screws from Joystick Assy.
3.) Slowly lift board form OP Panel.
8-60
3 DRAFT (J
below.
Figure 8-53 Main PWA Assy
below.
Figure 8-54 Joystick Assy
Section 8-13 - Replacement of OPIO and Related Parts
25, 2014)
UNE
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL