Remote Access To Service Platform; General; How The Customer Enables/Disables Disruptive Mode And Vco; Ge Icon And Remote Connection - GE LOGIQ S7 Expert Service Manual

GE H DRAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
Section 7-5

Remote Access to Service Platform

7-5-1

General

If the console is setup to connect to InSite ExC server (refer to Chapter.3 for InSite ExC Configuration),
then remote access technology may provide GE technicians the possibility to view the entire customer's
desktop and operation system for diagnostics and trouble shooting.
Using VCO (Virtual Console Observation) a service technician or the OnLine Center can access and
modify all PC settings and programs or run diagnostics on the customer's ultrasound scanner. Remote
access to the LOGIQ™ S7 Expert/Pro scanner requires permission and customer input before a GE
service technician or OLC can access the customer's ultrasound scanner remotely. "Disruptive Mode"
can be selected by the customer directly on the LOGIQ™ S7 Expert/Pro ultrasound system (see:
Section 7-5-2 on page 7-11), or remotely by the service technician or OLC.
7-5-2

How the Customer enables/disables Disruptive Mode and VCO

1.) If not already in read mode, FREEZE the image.
2.) Move the cursor to the GE icon and press the
3.) Select Connect Clinical Lifeline (see:
This activates "Disruptive Mode" and "VCO" for the application OLC to quickly assist the customer.
NOTE: To disable disruptive mode, select "CANCEL".
7-5-3

GE Icon and Remote Connection

Refer to
3 DRAFT (J
Figure 7-10 Connect Clinical Lifeline
Section 5-9 for Remote Access Icons.
Chapter 7 - Diagnostics/Troubleshooting
25, 2014)
UNE
right trackball key
Figure 7-10 below).
LOGIQ™ S7 E
S
ERVICE
(= right-click).
Enables Disruptive
Mode and VCO
GE icon
/P
XPERT RO
M
ANUAL
7-15