Connecting The Footswitch - GE LOGIQ S7 Expert Service Manual

GE H RAFT
EALTHCARE
D 5460683, R
IRECTION EVISION
3-6-5

Connecting the Footswitch

The footswitch should be directly connected to any accessible USB-port on the LOGIQ™ S7 Expert/Pro
(e.g., on rear of the system).
NOTE: Connection of the Footswitch is always the same
(no differences between PC-Motherboard version of the system)..
3-18
3 DRAFT (J
Figure 3-9 Connection Scheme - Footswitch
Section 3-6 - Connection of Auxiliary Devices
25, 2014)
UNE
LOGIQ™ S7 E /P
XPERT RO
S M
ERVICE ANUAL