Memory Channels; Wi Channel Functions; E Vfo And Memory Mode Selection; E Memory Channel Selection - Icom IC-707 Instruction Manual

4
Wi Channel functions
The IC-707's 32 memory channels are for pro-
grammed scan and storing often-used frequencies.
All memory channels are tunable. The frequency and
operating mode in each memory channel can be
changed temporarily. If required, the changed fre-
quency and mode can be memorized into the
memory channel.
Memory channels 26—30, P1 and P2 have the spe-
cial functions at right.
Push the [FUNC] switch, then push the [V/M] switch
to select MEMORY mode or VFO mode.
Refer to p. 14 "Mode types" for VFO mode and
MEMORY mode.
E Memory channel selection
While in VFO mode
Only the memory channel readout changes. The
function display shows a VFO frequency.
1) When "LOCK" appears, push the [LOCK] switch
to cancel the dial lock function.
Cancel "LOCK."
2) Push the [FUNC] switch, then rotate the main
dial to change the memory channel number
readout.
"FUNC" appears.
FUNC [_] then
3) Push the [V/M] switch to select MEMORY mode.
e The memory channel contents appear, and
"FUNC" disappears.
MEMORY CHANNELS
Normal memory channels. A fre-
quency and mode in each channel.
Split memory channels for split
frequency operation. A pair of
transmit and receive frequencies
and operating modes in each
channel. (p. 28)
Scan edge channels for pro-
grammed scan. A frequency and
mode in each channel. (p. 29)
While in MEMORY mode
The function display shows selected memory chan-
nel contents.
1) When "LOCK" appears, push the [LOCK] switch
to cancel the dial lock function.
e For channel selection using the [UP]/[DN] switches
on the microphone, step 1) is not required.
2) Push the [FUNC] switch, then push the [V/M]
switch to select MEMORY mode.
3) Push the [FUNC] switch, then rotate the main
dial.
e Pushing the [UP] or [DN] switch on the microphone
also selects a memory channel.
"FUNC" appears.
4) Push the [FUNC] switch to cancel "FUNC."