Memory Channels; Memory Channel Selection; Memory Operation; D Using The Keypad - Icom IC-7850 Instruction Manual

11

MEMORY OPERATION

■ Memory channels

The transceiver has 101 memory channels. The Mem-
ory mode is very useful for quickly selecting often-used
frequencies.
All 101 memory channels are tunable, which means
the entered frequency can be temporarily tuned by ro-
tating [MAIN DIAL].
MEMORY
CHANNEL
Regular memory
channels
Scan Edge
memory
channels

■ Memory channel selection

D Using the M-CH [p] or [q] keys
Push [V/M] to select the Memory mode.
q
Push M-CH
w [p] or [q]
desired memory channel.
• Hold down M-CH [p] or [q] to continuously change the

memory channels.

• You can also push [UP] and [DN] on microphone keys.
To return to the VFO mode, push [V/M] again.
e

D Using the keypad

Push [V/M] to select the Memory mode.
q
Push [F-INP].
w
Push the keypad keys to enter the desired memory
e
channel number.
• Enter 100 or 101 to select Scan Edge channels P1 or
P2.
Push M-CH
r [p] or [q]
ory channel.
[EXAMPLE]
To select memory channel 3:
- Push [F-INP• ], [3], then push M-CH
ent
To select memory channel 12:
- Push [F-INP• ], [1], [2], then push M-CH
ent
[q]
To select Scan Edge channel P1:
- Push [F-INP• ], [1], [0], [0], then push M-CH
ent
.
or [q]
To select Scan Edge channel P2:
- Push [F-INP• ], [1], [0], [1], then push M-CH
ent
.
or [q]
MEMORY
CHANNEL
NUMBER
One frequency and one mode
1–99
in each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scans.
several times to select the
to switch to the entered mem-
[p] or [q]
CAPABILITY
• Memory mode
M-CH number
M-CH frequency
VFO frequency
.
[p] or
[p]
[p]
11-2
TRANSFER OVER-
TO VFO WRITING
Yes Yes
Yes Yes
M-CH [�] or [�]
[MAIN]
CLEAR
Yes
No
[V/M]
[SUB]
F-INP
ENT
PUSH