Memory Operation; Memory Channels; Memory Channel Selection - Icom ic-718 Instruction Manual

 Memory channels
The transceiver has 101 Memory channels. The Mem-
ory mode is very useful for quickly changing to often-
used frequencies.
MEMORY
MEMORY
CHANNEL
CHANNEL
NUMBER
Regular memory
1–99
channels
Scan edge
memory P1, P2
channels
 Memory channel selection
D Using the [UP Y] or [Z DN] keys
q Push [V/M] to select the Memory mode.
• "MEMO" appears.
w Push [CH] to enter the memory CH select mode.
• "MEMO" blinks.
e Push [UP Y] or [Z DN] several times to select the
desired Memory channel.
• Hold down [UP Y] or [Z DN] to scroll to the desired
memory.
r Push [CH] to exit the memory CH select mode.
t To return to the VFO mode, push [V/M] again.

MEMORY OPERATION

All 101 Memory channels are tunable, which means
the entered frequency can be tuned temporarily with
[DIAL] in the Memory mode.
CAPABILITY
One frequency and one mode
in each memory channel.
One frequency and one mode in
each memory channel as scan
edges for a programmed scan.
D Using the keypad
q Push [V/M] to select the Memory mode.
• "MEMO" appears.
w Push [CH] to enter the memory CH select mode.
• "MEMO" blinks.
e Push [F-INP/ENT], then push the desired Memory
channel number using the keypad.
r Push [F-INP/ENT] to select the desired Memory
channel.
t Push [CH] to exit the memory CH select mode.
1
V/M
CH
Z
Y
DN or UP
CH
TRANSFER OVER-
TO VFO WRITING
Yes Yes
Yes Yes
1
V/M
CH
F-INP
ENT
V/M
F-INP
ENT
CH
6
CLEAR
Yes
No
1 2
A=B
35