Memory Operation; Memory Channel Selection - Icom IC-A14IC-A14S Instruction Manual

n Memory channel selection
IC-A14 has 200 memory channels
and IC-A14S has 100 memory channels for stor-
fault setting)
age of often-used frequencies.
q Push [MR] to select memory mode.
• Memory indicator appears and memory channel number is dis-
played briefly.
• Memory bank number also displays with IC-A14.
Using [Y Using [Y Using [ ]/[Z ]/[ ]: ]/[Z
w Push [Y]/[Z] to select the desired memory CH number.
• Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed
frequency (or memory name, if programmed) is displayed. frequency (or memory name, if programmed) is displayed. frequency (or memory name, if programmed) is displayed.
• If no memory CH is programmed, no memory CH selection is f no memory CH is programmed, no memory CH selection is f no memory CH is programmed, no memory CH selection is
available.
Using the Keypad— IC-A14 only:
w Push 2 appropriate digit key (00 to 99, depending on
ush 2 appropriate digit key (00 to 99, depending on ush 2 appropriate digit key (00 to 99, depending on
bank setting condition) to select the desired memory CH setting condition) to select the desired memory CH setting condition) to select the desired memory CH
number, then push [ENT] [ENT] [ENT].
• Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed Memory channel number is displayed briefly, then programmed
frequency (or memory name, if programmed) is displayed. frequency (or memory name, if programmed) is displayed. frequency (or memory name, if programmed) is displayed.
• If no memory CH is programmed in the selected BANK, no f no memory CH is programmed in the selected BANK, no f no memory CH is programmed in the selected BANK, no f no memory CH is programmed in the selected BANK, no
memory CH selection is available. memory CH selection is available. memory CH selection is available.
(20 channels × 10 banks; de-
Appears when memory
mode is selected.
.

MEMORY OPERATION

n Memory bank selection
(Available with the IC-A14 only)
A 200 of the IC-A14's memory channels are divided into A 200 of the IC-A14's memory channels are divided into A 200 of the IC-A14's memory channels are divided into
bank
(up to 10 banks are available depending on setting) 10 banks are available depending on setting) 10 banks are available depending on setting)
ple memory grouping.
q Push [MR] to select memory mode.
to select memory mode. to select memory mode. to select memory mode. to select memory mode.
w Push [FUNC], and push [BANK](3) to enter bank selec-
, and push , and push
tion mode.
e e
P P ush ush ush [Y]/[Z] or ap-
propriate digit key propriate digit key propriate digit key
([0] to [9]) to enter
the desired memory
BANK number, then
push [ENT].
r Push [Y]/[Z], or 2
appropriate digit key
and [ENT] to select
the desired memory
channel.
[ENT]
4
for sim- for sim- for sim-
[BANK](3) [BANK](3) [BANK](3) [BANK](3) to enter bank selec- to enter bank selec-
Appears when bank selec-
tion mode is selected.
[Y] [MR]
[Z]
[BANK](3)
Keypad
[FUNC]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
12