Configuring Aggregation Key Words Of Records; Optional) Configuring The Exported Traffic Statistics - Huawei S9700 Series Configuration Manual

S9700 Core Routing Switch
Configuration Guide - SPU

5.7.3 Configuring Aggregation Key Words of Records

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream record record-name
The record view is displayed.
Step 3 (Optional) Run:
match ipv4 { protocol | tos | source-address | destination-address | source-port |
destination-port }
The IPv4 aggregation key words of records are configured.
Step 4 (Optional) Run:
match ipv6 { protocol | tc | source-address | destination-address | source-port |
destination-port | flow-label }
The IPv6 aggregation key words of records are configured.
----End

5.7.4 (Optional) Configuring the Exported Traffic Statistics

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream record record-name
The record view is displayed.
Step 3 Run:
collect counter { bytes | packets }
The mode of exporting traffic statistics is configured.
Step 4 Run:
collect interface { input | output }
The traffic statistics sent to the NSC contain the indexes of the inbound interface and outbound
interface of the flows.
----End
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
165