Checking The Configuration; Configuring 802.1X Authentication - Huawei Quidway S9300 Configuration Manual

2 NAC Configuration
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
web-auth-server version v2 [ v1 ]
The version of the portal protocol is set.
By default, two versions coexist. If version 1 is not selected, only version 2 is in use.
----End

2.3.8 Checking the Configuration

Context
The configurations of Web authentication are complete.
Procedure
l
----End
Example
# View the configuration of the Web authentication server.
<Quidway> display web-auth-server configuration
Listening port
Portal
Include reply message : enabled
------------------------------------------------------------------------
Web-auth-server Name : servera
IP-address
Shared-key
Port / PortFlag
URL
------------------------------------------------------------------------
1 Web authentication server(s) in total

2.4 Configuring 802.1x Authentication

This section describes how to configure the 802.1x authentication function.
2.4.1 Establishing the Configuration Task
2.4.2 Enabling Global 802.1x Authentication
2.4.3 Enabling 802.1x Authentication on an Interface
2.4.4 (Optional) Enabling MAC Bypass Authentication
2.4.5 Setting the Authentication Method for the 802.1x User
2-8
Run the display web-auth-server configuration command to view the configuration of a
Web authentication server.
: 2000
: version 1, version 2
: 100.1.1.114
:
: 10 / NO
:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 06 (2010–01–08)