1B1-10 M162 ENGINE MECHANICAL
POLY V-BELT AND TENSIONING DEVICE
Preceding Work : Removal of cooling fan
1 Poly V-belt
POLY V - BELT
2 Belt Tensioning Pulley
Removal & Installation Procedure
1. Release the belt tension by turning the belt
tensioning pulley nut clockwise.
Installation Notice
Tightening Torque
2. Remove the poly v-belt.
Notice: Check the belt for damage and tensioning
pulley bearing point for wear and replace them if
necessary.
3. Install the belt by turning the nut of tensioning
YAD1B250
pulley clockwise.
YAD1B330
40.5 - 49.5 N•m
(29.9 - 36.5 lb-ft)
SSANGYONG Y200