External Sirens - Eaton i-on series Engineering Manual

i-on Range
MENU Option
Enable Keypad
Keypad K1-51...K1-95
Replace Keypad
Keypad K1-51...K1-95
Radio Keypads
Add/Del Radio Keypad
Edit Keypads
Radio Kpd 01...20
Name
Partitions
Key A
Key B
Key C
Key D

External Sirens

Add/Delete Ext. Siren
Edit external siren
Siren 01...20
Name
Partitions
Info Modules
Teach Info Module
Updates
Ready-to-set LED
WAMs
Add/Del WAM
Edit WAM
2 OUTPUTS
Radio outputs
Add Outputs
Edit Outputs
O/P 1...04/08
Exp. R1>nn>01...08
Pulsed
Partitions
Factory Default
Yes (all keypads enabled)
"Radio Kpd 0n"
Partition 1
Name: "Key A"
Setting: Partition 1 Full Set
OR Full Set in a Part Setting System
Name: "Key B"
Setting: Partition 2 Full Set
OR Part Set B in a Part Setting System
Name: "Key C"
Setting: Partition 3 Full Set
OR Part Set C in a Part Setting System
Name: "Key D"
Setting: Partition 4 Full Set
OR Part Set D in a Part Setting System
Partition 01
Name Type
O/P 01 Not Used
...
O/P 04/08
Name Type
O/P R1>00>01 Not Used
...
O/P R1>00>08
No
The Installer Menu
Notes
30 50 160
Display shows keypads currently
addressed on bus.
30 50 160
Display shows keypads currently
addressed on bus.
Total number of radio keypads
depends on control unit type.
Appears only in a Partitioned
system.
30 40 50 160
Appears only in a Partitioned
system.
30 40 50 160
Appears only in a Partitioned
system.
30 40 50 160
Appears only in a Partitioned
system.
30 40 50 160
Appears only in a Partitioned
system.
Siren numbers depend on panel.
30 50 160
Appears only in a Partitioned
system.
40
30 40 50 160
16 40
i-on16 has four radio outputs, i-
on40 has eight.
30 50 160
Appears only in a Partitioned
system. All outputs allocated to all
Page 35