Eaton i-on series Engineering Manual page 48

The Installer Menu
MENU Option
Siren Delay
Siren Time
Strobe on Set
Strobe on Unset
Part Set Exit Mode
Part Set Settle Time
Part Set Exit Time
Part Set Entry Time
Part Set Alarm
Response
Part Set Siren Delay
Part Set Siren Time
Part Set Final Exit
Part Set Entry Route
Part Set Strobe Set
Part Set Strobe Unset
Partition 2...nn
Full Set Link
Calendar Set
4 SYSTEM OPTIONS
Wired Zone type
Panel Zones
All Zones
User Access
HUA keys active
Quick Set
Quick Omit
User code req'd
2 Way Replies
2W Set Instant
Duress Enable
User reset
Zone alarms
Page 38
Factory Default
0 minutes
15 minutes
Off
Off
Instant Set
15 seconds
40 seconds
40 seconds
Siren
0 minutes
15 minutes
Final exit
Entry Route
Off
Off
"Partition nn"
Partitions 2-nn: No
None
2 Wire FSL 2k2/4k7
2 Wire FSL 2k2/4k7
No
No
No
Yes
Yes
Yes
No
Yes
i-on Range
Notes
systems. Applies to both full and
part set partition.
For full set only.
For full set only.
To comply with EN50131-1 Clause
8.6 minimum is 90s, maximum is
15mins.
Appears only if Part Set Exit Mode
is "Final Door" , "Lock Set" or "Exit
Terminate".
Appears only if Part Set Exit Mode
is "Timed Set" or "Silent Set".
Includes Internal alarm.
This setting is required in order to
comply with EN50131.
For part set.
For part set.
To comply with EN50131-1 Clause
8.6 minimum is 90s, maximum is
15mins.
Number of partitions depends on
panel type. All other defaults as for
Partition 1.
30 40 50 160. Number of
partitions depends on panel type.
Partition 1 is common partition.
50 160
No events or partitions
Select the global wiring type during
initial power up. Also affects i-on16
when KEY-KPZ01 connected.
30 40 50 160
30 50 160
This option also appears on i-on16
and i-on40 when a wired keypad
with zones is fitted.
This setting is required in order to
comply with EN50131.
This setting is required in order to
comply with EN50131.
Used with FOB-2W-4B.
Used with FOB-2W-4B.
(Change to Yes for Duress Code.)
This option appears only if
Confirmation Mode is "Basic"