Testing The System; Sirens & Sounders - Eaton Menvier 20 Administrator's And User Manual

Menvier30/40/100/300
Special User Numbers
Downloader
Virtual keypad
Note: The word "Web" will appear in the log entry if the installer logged on
using the web browser.

Testing the System

If you think that your system is not working correctly then a Master User or
Admin User can use the Test option to test various peripherals. If the test
confirms that part of the system is not working then contact your installer.
The Test option also lets you check the identity of Remote controls, Hold
Up Alarms and Tags.
Sirens & Sounders
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  until you see:.
4.
Press .
5.
The display shows:
Press  .
6.
The bottom line of the displays
shows the first in a list of the siren
types that you can test:
Press .
7.
If you have external radio sirens
fitted to your system, you will see:
If you do not have any external
radio sirens fitted the keypad
shows for a few seconds:
Control unit type
055 105
056 106











4. Administration
255
256





505
506
Page 59