Eaton i-on series Engineering Manual page 132

Installer Menu Options
Downloader
IP Address
Sub-Net Mask
Gateway Address
If there is a Chiron, GPRS or Ethernet module fitted then the above items appear under a
sub-menu titled "Panel Ethernet".
Chiron or Ethernet Module
30 40 50 160
If there is a Chiron or Ethernet module fitted then you will see the following additional
options, designed to specify the IP details for the module itself, under a sub-menu titled
"Module Ethernet":
IP Address
Sub-Net Mask
Page 122
From VKP Instant the user can control or program the system as
long as they have a valid access code.
If any other user is already logged into the system then the VKP
Instant shows the message "User Menu in use" or Installer on Site"
as appropriate.
If an installer tries to log in by use their access code with VKP
Instant then they will only be able to log in when the system is
completely unset.
VKP Instant is designed for use on mobile devices such as the i-
pad, i-pad mini, i-phone, Galaxy S3 and Nexus10.
Port Number This is the port that the control unit uses for
Downloader over IP. The format is a group of digits up to five digits
long. The default port is 55132.
This is the control unit's own IP address. The IP address comprises
four groups of digits. Each group is up to three digits long, and is
separated from the next group by a "dot", for example
"192.168.000.001". Press "*" to key in the dot.
If necessary, key in the sub-net mask, for example
"255.255.255.000". This number has the same format as the IP
address.
This is the IP address of the router that connects the local network,
to which the control unit is connected, to rest of the Internet (or to a
larger network).If necessary, key in the gateway IP address. This
number has the same format as the IP address.
Notes:
1. If you leave IP Address, Sub-Net Mask and Gateway Address
blank then the control unit will use DHCP (Dynamic Host Control
Protocol) to obtain these values from a DHCP server.
2. Once you have entered the details described above, you can see
what IP address you have given the control unit by selecting the
About Panel - About Comms - IP Address option from the Installer
menu. If you have decided to use DHCP (see Note 1) then this is
the only place where you can see what IP address the control unit
is using.
This is the module's own IP address. The IP address comprises
four groups of digits. Each group is up to three digits long, and is
separated from the next group by a "dot", for example
"192.168.000.001". Press "*" to key in the dot.
If necessary, key in the sub-net mask, for example
"255.255.255.000". This number has the same format as the IP
address.
i-on Range