Rear View - SATO CL4NX Operator's Manual

1 Parts Identification
1.1.2

Rear View

u
Wireless LAN antenna (optional)
Connector for installation of optional wireless
LAN antenna.
i
RS-232C connector
To connect the printer to the computer using
the RS-232C serial interface.
You can also connect a barcode checker.
Usage of the RS-232C interface can be
selected in the Interface > RS-232C >
Interface menu.
o
IEEE1284 connector
To connect the printer to the computer using
the IEEE1284 interface.
a
EXT connector (External signal
interface)
Interface connector for external signals.
Connect an optional device to this terminal.
s
USB connector (Type B)
To connect the printer to the computer using
the USB interface.
16
CL4NX/CL6NX Operator Manual
d
USB connector (Type A)
Enable the storage of printer setting
information with USB memory and for
connecting other devices like a barcode
checker, barcode scanner or a keyboard.
CAUTION
Be sure to perform a virus check for the USB
memory before connecting it to the printer. SATO
Corporation shall not be held responsible for any
printer malfunctions caused by a virus spread via
USB memory.
f
LAN connector
To connect printer to the network using the
LAN interface.
g
AC input terminal
Supplies power to the printer through the
inserted power cord.
Before connecting, make sure that the AC
voltage of your region is in the range of AC 100
to 240 V, 50 to 60 Hz.
7
8
9
10
11
12
13
14