Font Download Mode - SATO CG412DT Service Manual

4.7 FONT DOWNLOAD MODE

In this mode, the printer is set to download fonts from the host computer. Remember to set the printer to the
correct active interface to be used for the data transfer.
Status of printer in Font Download Mode
Start-up
No
Reception
from interface?
Yes
Reboot
command
reception?
No
No
Font data
reception?
Yes
Download
Download
completion
Reboot and start in normal mode
Online
Notes:
• Use the selected interface for PC connection.
The downloaded font goes into effect when you restart the printer.
•
• When not receiving reboot command, manually reboot the printer and restart in normal operation mode.
• Ensure that the printer is in the "Wait to receive data" status ( ERROR indicator: blinking red light) before
you manually turn off the printer.
• During the process of downloading, if ON LINE (POWER) and ERROR indicators respond differently from
above mentioned procedure, an error may have occurred. Please refer to Section 4.11 Error Occurrence
While Downloading for details.
CG4 Series Service Manual
Activation via operation
setting mode or
download command.
Yes
At the start of download
mode
Wait to receive data
Start receiving data/
Receiving data
Writing to flash ROM
At the time of download
completion
Printer turns off
Printer turns on again
Online mode
Section 4: Operation and Configuration
ON LINE (POWER)
indicator
(From step 4 of Operation Setting Mode. )
Off (while pressing Off (while pressing
FEED/LINE) FEED/LINE)
Off (after release of Red light (after
FEED/LINE) release of
FEED/LINE)
Blinking green light Off
Off Blinking red light
Blinking green light Blinking red light
(lights alternately)
(lights alternately)
Green light Off
Off
Blinking green light
Off Off
Off Red light
Green light Off
Green light
Off
ERROR
Buzzer
indicator
One
short
beep
One long
beep
One
short
beep
Three
long
beeps
One short
beep
Page 4-17