Headlight Manual Levering Switch Inspection (If Equipped); Headlight Leveling Actuator Inspection (If Equipped) - Suzuki 2006 SX4 Service Manual

9B-30 Lighting Systems:
Headlight Manual Levering Switch Inspection (If
Equipped)
Check for resistance between terminals at each switch
position.
If check result is not as specified, replace switch.
1
2
3
Switch Position
-
0
1
2
3
4
S6RW0C9206019
Terminal Resistance ( )
4370 - 4830
1 and 2
646 - 714
1 and 3
3724 - 4116
2 and 3
1292 - 1428
1 and 3
3078 - 3402
2 and 3
1938 - 2142
1 and 3
2432 - 2688
2 and 3
1 and 3 2584 - 2856
2 and 3 1786 - 1974
1 and 3 3230 - 3570
2 and 3 1140 - 1260
I4RS0B920012-01
Headlight Leveling Actuator Inspection (If
Equipped)
Headlight auto leveling system
1) Make sure all couplers of headlight and leveling
actuator are connected securely.
2) Park vehicle in front of blank wall (screen).
3) Turn ignition switch to ON position.
4) Perform "Headlight Leveling Warning Light Check".
5) Connect service wire (2) to terminals of diagnosis
connector (1).
6) Perform Steps a) through c) described below within
20 seconds after Step 5).
a) Turn lighting switch (3) to "HEAD" position and
then turn lighting switch to OFF position.
b) Repeat Step a) 2 times.
c) Turn lighting switch (3) to "HEAD" position.
7) Check that optical axes of headlights reflected on
blank wall (screen) change. If not, go to "Headlight
Auto Leveling System Symptom Diagnosis (If
Equipped)".
Headlight manual leveling system
1) Make sure all couplers of headlight and leveling
actuator are connected securely.
2) Park vehicle in front of blank wall (screen).
3) Turn ignition switch to ON position.
4) Turn lighting switch to "HEAD" position.
5) Move headlight leveling switch and check that
optical axes of headlights reflected on blank wall
(screen) change then. Also check that leveling
actuator sounds slightly while moving leveling
switch. If optical axes do not change, go to
"Headlight Manual Leveling System Symptom
Diagnosis (If Equipped)".
S6RW0C9206026
3
2
1
I6RW0C920021-01