Power Door Lock Actuator Inspection (If Equipped) - Suzuki 2006 SX4 Service Manual

9F-9 Security and Locks:
Power Door Lock Actuator Inspection (If
Equipped)
1) Remove door trim from door panel.
For front door, refer to Step 1) to 3) of "Front Door
Glass Removal and Installation in Section 9E".
For rear door, refer to Step 1) to 3) of "Rear Door
Glass Removal and Installation in Section 9E".
For rear end door, refer to Step 1) of "Rear End Door
Assembly Removal and Installation in Section 9J".
2) Disconnect power door lock actuator coupler.
3) Connect battery positive (+) and negative (–)
terminals to the door lock actuator terminals (a, b, c,
d) as shown in figure.
If it does not operate as specified in the following
table, replace door lock assembly.
For front door
a b c d
[A]
Right side switch terminals
Left side switch terminals
Lock Unlock
Unlock Lock
[B]
Right side switch terminals
Left side switch terminals
Unlock Lock
Lock Deadlock
Lock Unlock
Deadlock Unlock
[A]: Without deadlock
[B]: With deadlock
S6RW0C9606006
d b
a c
d b b a
a c c d
I5RW0C960002-03
For rear door
a b c d
[A]
Right side switch terminals
Left side switch terminals
Lock Unlock
Unlock Lock
[B]
Right side switch terminals
Left side switch terminals
Unlock Lock
Lock Deadlock
Lock Unlock
Deadlock Unlock
[A]: Without deadlock
[B]: With deadlock
For rear end door
Lock Unlock
a c
d b
a c c d
d b b a
I5RW0C960001-03
a b
a
b
I5RW0C960003-03