Headlight Bulb Replacement (Discharge Headlight Model) - Suzuki 2006 SX4 Service Manual

9B-20 Lighting Systems:
Installation
Reverse removal procedure noting the following.
• Install headlight mounting bolts and clip (1), and then
tighten headlight mounting bolts ("1" – "2") according
to numerical order as shown in figure.
"1"
• After installation, be sure to inspect and adjust aiming
referring to "Headlight Aiming Adjustment with
Screen".
Headlight Bulb Replacement (Discharge
Headlight Model)
WARNING
!
• To avoid danger of being burned, don't
touch when the bulb is hot.
• Don't touch glass surface of bulb, to avoid
deteriorate as the case may be unclear
when bulb light on at dirty condition.
• Be sure to read "Precautions for Discharge
Headlight Service (If Equipped)" before
starting to service work.
1
"2"
I5RW0A920005-01
S6RW0C9206002
1) Check to ensure that lighting switch is at OFF
position.
2) Disconnect negative (–) cable at battery.
3) Remove headlight housing referring to "Headlight
Housing Removal and Installation".
4) Remove cover (1) from headlight housing by turning
it counterclockwise.
5) Remove igniter (2) from discharge headlight bulb by
turning it counterclockwise.
2
6) Replace bulb (1) from headlight housing.
7) Install igniter to discharge headlight bulb by turning it
clockwise.
8) Install cover to headlight housing by turning it
clockwise.
9) Install headlight housing to vehicle body referring to
"Headlight Housing Removal and Installation".
10) Connect negative (–) cable at battery.
11) After installation, be sure to inspect and adjust
aiming referring to "Headlight Aiming Adjustment
with Screen".
1
I6RW0C920014-02
1
I6RW0C920015-02