Loading Paper In The Side Paper Deck (Option) - Canon NP6551 Operator's Manual

Loading Paper in the Side Paper Deck (option)

NOTICE: ●
The paper size for the Side Paper Deck can be set for LTR-size paper. The size must be
changed by your service representative. For more details, contact your service
representative.
Press the open button to open the paper deck.
1
Pull out the Side Paper Deck until it stops.
Open a package of copy paper, and remove the
2
paper stack. (Make sure that the seam on the
centre of the package is face up.)
NOTICE:
●
Rewrap any remaining paper in its original
package, and store it in a dry place away from
direct sunlight.
●
Do not copy on the following types of copy stock;
doing so may cause a paper jam.
• Severely curled or wrinkled paper
• Transparencies for digital full-colour copiers
• Paper which has been copied on using a digital
• Paper which has been printed on using a
MEMO: ●
Side Paper Deck holds up to approximately 3,500
sheets of copy paper (20-lb bond).
●
For high-quality copies, use paper recommended by
Canon.
Place the paper stack in the Side Paper Deck.
3
Even out the edges of the paper stack. Load the
paper stack against the right wall of the paper
drawer or paper deck.
REQUEST:
● Do not place any objects in the empty space of
the Side Paper Deck, as this may cause damage.
NOTICE:
●
If the copy paper is curled, curl it down before
placing it in the Side Paper Deck.
●
Make sure that the height of the paper stack does
not exceed the limit mark (
Side Paper Deck.
5-6
full-colour copier (do not copy on the reverse
side either)
thermal transfer printer (do not copy on the
reverse side either)
) at the back of the
Open button