Specifying Automatic Gradation and Exposure
Adjustments (Automatic Gradation Adjustment)
This function enables you to recalibrate the copier when you notice irregularities in the colour of
the copy. The procedure involves making test prints and placing them on the platen glass for
scanning. The copier will then be automatically recalibrated.
IMPORTANT
•
Make sure that you set the test print correctly. An improperly placed test print can cause the colour
gradation or exposure to be recalibrated incorrectly.
NOTE
•
Make sure that A3-size paper is loaded into the copier before proceeding.
•
Test prints are not counted as copies.
1
Display the required screen as follows:
(Additional Functions) → [Adjustment/Cleaning] → [Grad. A Adjst]
Press
2
Press [Test Print 1].
The message "Printing Test Print 1..". is displayed, and Test Print 1 is output.
3
Place the first test print on the platen glass.
Place the test print face down on the platen glass, with the black band along the back edge.
Adjusting the Copier (Adjustment/Cleaning)
2
2-39