Fixing Drive Unit; Before Removing The Fixing Drive Unit; Removing The Fixing Drive Unit - Canon imageRUNNERC1022 Service Manual

Chapter 10
- Do not disassemble the fixing sleeve unit in the field.
Disassembling it may cause a functional fault.

10.4.3 Fixing Drive Unit

10.4.3.1 Before Removing the Fixing Drive Unit

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-8)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-9)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]
7) Remove the Upper Frame Unit.(page 11-20)Reference [Removing the
Upper Frame Unit]
8) Remove the Reversal Unit.(page 9-29)Reference [Removing the Re-
versal Unit]

10.4.3.2 Removing the Fixing Drive Unit

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Open the cable holder [1] to remove the flat cable [2].
2) Disconnect the USB connector [3].
10-12
F-10-31
0019-5957
0019-5959
3) Remove the cover [1].
- 1 screw [2]
4) Disconnect the connector [1] and remove the 2 harness bands [2] and the
harness [3] from the harness guide cover [4].
[2] [1]
[3]
F-10-32
[1] [2]
F-10-33