Fixing Drive Assembly - Canon GP215 Service Manual

B. Fixing Drive Assembly
1. Removing the Fixing Drive
Assembly
1) Disconnect the power plug.
2) Remove the four screws, and remove the rear
cover.
3) Remove the three screws, and remove the
flywheel.
4) Remove the two screws, and disconnect all
connectors; then, remove the DC controller
PCB.
5) Release the tension spring w, and remove
the fixing drive belt.
2
Figure 4-310
COPYRIGHT © 1996 CANON INC.
1
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
5) Remove the two screws, and remove the con-
nector mount e found at the lower right of the
rear of the copier.
6) Remove the two screws t, and disconnect all
connectors; then, remove the composite
power supply PCB.
5
Figure 4-311
7) Remove the seven screws u, and remove the
fixing drive assembly y.
7
6
Figure 4-312
4 5
3
7
4–13