Pull Out The Saddle Unit (Service Position) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Main Units > Pull out the Saddle Unit (Service Position)

Pull out the Saddle Unit (Service Position)

2) Pull out the saddle unit until it will stop.
1) Remove the front door.
（Refer to page 4-17）
3) Release the rail stopper and pull out the saddle unit further about 5 cm.
4 Parts Replacement and Cleaning Procedure > Main Units > Pull out the Saddle Unit (Service Position)
F-4-67 F-4-67
F-4-68 F-4-68
4-32
4-32