Preparing The Finisher For Installation; Connecting To Host Machine - Canon Staple Finisher-AA1 Service Manual

Preparing The Finisher for
Installation
1.
2x
A
NOTE:
Install the Ground rail to the position [B].
2.
When the Service Book Holder has already been
installed in the Host Machine, relocate it to the
Finisher.
TP ; M3 6
B C

Connecting to Host Machine

1.
CAUTION:
When connecting the Interface Cable, be sure to turn
off the Host Machine and disconnect its power cable
from the outlet.
1x
2.
NOTE:
If the positioning pin of the Buffer Pass Unit is not fitted the
positioning hole on the Finisher, carry out the adjustment
described in "Adjusting the Height".
205
7. Installation