Line Card Models; Line Card Components; Figure 24: Ex9200-2C-8Xs Line Card; Table 25: Ex9200-2C-8Xs Line Card - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide

Line Card Models

Line Card Components

58
can install in the line card slots on the front of the switch chassis. Line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions.
This topic describes:
Line Card Models on page 58
Line Card Components on page 58
Table 25 on page 58 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.

Table 25: EX9200-2C-8XS Line Card

Model Description
EX9200-2C-8XS A line card with two 100-Gigabit Ethernet ports, each
of which can house 100-gigabit C form-factor
pluggable (CFP) transceivers; and eight 10-Gigabit
Ethernet ports, each of which can house 10-gigabit
small form-factor pluggable plus (SFP+) transceivers
See Figure 24 on page 58

Figure 24: EX9200-2C-8XS Line Card

1— Ejector levers
2— Line card LED
3— LEDs for the 10-Gigabit Ethernet ports
You can use the
show version
switches loaded on the switch.
The EX9200-2C-8XS line card has:
Two 100-Gigabit Ethernet ports, each of which can house CFP transceivers. These
ports support 100GBASE-LR4 and 100GBASE-SR10 transceivers.
Eight 10-Gigabit Ethernet ports, each of which can house SFP+ transceivers. These
ports support 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, and 10GBASE-ZR transceivers.
4— 100-Gigabit Ethernet ports
5— LEDs for the 100-Gigabit Ethernet ports
6— 10-Gigabit Ethernet ports
command to see the version of Junos OS for EX Series
Copyright © 2017, Juniper Networks, Inc.
Junos OS Release
Required
13.2R1 or later