Acx7348 Rack And Cabinet Requirements; Rack Requirements For Acx7348 Routers - Juniper ACX7348 Hardware Manual

ACX7348 Rack and Cabinet Requirements

SUMMARY
You must install the ACX7348 router on a rack or in
a cabinet that meets specific dimension, strength,
and airflow requirements.

Rack Requirements for ACX7348 Routers

You can mount the ACX7348 routers on two-post racks or four-post racks.
The size, strength, and location of the rack must accommodate the router's weight and external
dimensions.
Table 20 on page 48 provides the rack requirements and guidelines for ACX7348 routers.
Table 20: Rack Requirements for ACX7348 Routers
Rack Requirement Guidelines
Rack type Use a two-post or four-post rack that provides bracket holes or hole patterns spaced at 1 U
increments (1.75 in. or 4.45 cm), and ensure that the rack meets the size and strength
requirements to support the weight of the router.
A U is the standard rack unit defined in
(document number EIA-310–D) published by the Electronics Industry Association.
Mounting bracket Ensure that the holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm) so
hole spacing that the router can be mounted in any rack that provides holes spaced at that distance.
IN THIS SECTION
Rack Requirements for ACX7348
Routers | 48
Cabinet Requirements for ACX7348
Routers | 49
Cabinets, Racks, Panels, and Associated Equipment
48