Advertisement
Removing an MX150 from a Rack or Cabinet
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
If you need to relocate an installed MX150, use the procedure described in this topic. (The
remainder of this topic uses rack to mean rack or cabinet.)
NOTE:
When you remove multiple devices from a rack, remove the device at
the top of the rack first and proceed to remove the rest of the devices from
top to bottom.
CAUTION:
At least two people must be available to lift a device chassis out
of a rack—one person to unscrew the mounting screws from the brackets
and the second person to hold the chassis.
Before removing the MX150 from a rack:
Ensure that the rack or cabinet is stable and secured to the building.
Ensure that there is enough space to place the removed device in its new location and
along the path to the new location.
Read
"General Safety Guidelines and Warnings" on page
to
"Chassis Lifting Guidelines for MX150" on page
Ensure that the device has been safely powered off and that you have unplugged
(disconnected) the power cords.
Ensure that you have disconnected any cables or wires attached to the device.
Ensure that you have the following parts and tools available to remove the device:
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack
mounting screws.
A labeled bag to hold the removed screws.
To remove an MX150 from a rack:
Use the appropriate Phillips (+) screwdriver to remove the mounting screws that
1.
attach the chassis front-mounting brackets to the rack.
Place the removed screws in a labeled bag. You will need them when you reinstall
2.
the chassis.
Lift the chassis from the rack and carefully move the chassis to its new location.
3.
General Safety Guidelines and Warnings on page 121
Chassis Lifting Guidelines for MX150 on page 130
Chapter 14: Removing the MX150
121, with particular attention
130.
99
Advertisement
Chapters
