Add/Edit An Address Record - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 7 Device Advanced Settings

Table 87 Device Operation > Device Configuration > Advanced > DNS > Address

Record (continued)

7.8.1 Add/Edit an Address Record

Use this screen to create or edit an address record.

Figure 95 Device Operation > Device Configuration > Advanced > DNS > Address

Record > Add/Edit

The following table describes the labels in this screen.

Table 88 Device Operation > Device Configuration > Advanced > DNS > Address

Record > Add/Edit

Enable Wildcard Select the check box to enable DNS wildcard.

This column displays whether or not the DNS wildcard feature is

enabled for this domain name.

This is the IP address of a host.

Click the Add button to open a screen where you can add a new

address record.

Click this to modify an address record for the device.

Click this to delete an existing record. A window display asking you to

confirm that you want to delete the record. Note that subsequent

records move up by one when you take this action.

Type a fully qualified domain name (FQDN) of a server. An FQDN starts

with a host name and continues all the way up to the top-level domain

name. For example, www.zyxel.com.tw is a fully qualified domain

name, where "www" is the host, "zyxel" is the second-level domain, and

"com.tw" is the top level domain.

If this entry is for one of the WAN ports, select the WAN port.

For entries that are not for one of the WAN ports, select Custom and

enter the IP address of the host in dotted decimal notation.

Click this to save your changes back to the device.

Click this to exit this screen without saving.

Vantage CNM User's Guide