ZyXEL Communications Vantage CNM 2.3 User Manual page 359

To access this screen, go to the User screen (see
click either the Add icon or an Edit icon.
Figure 158 Device Operation > Device Configuration > Object > User/Group > User
> Add/Edit
The following table describes the labels in this screen.
Table 141 Device Operation > Device Configuration > Object > User/Group > User >
Add/Edit
LABEL
User Name
User Type
Password
Retype
Description
Authentication
Timeout
Settings
Vantage CNM User's Guide
DESCRIPTION
Type the user name for this user account. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive. User names
have to be different than user group names, and some words are
reserved. See Section 14.1.1.1 on page
Select what type of user this is. Choices are:
• Admin - this user can look at and change the configuration of the
ZyWALL
• Limited-Admin - this user can look at the configuration of the
ZyWALL but not to change it
• User - this user has access to the ZyWALL's services but cannot look
at the configuration
• Guest - this user has access to the ZyWALL's services but cannot
look at the configuration
• Ext-User - this user account is maintained in a remote server, such
as RADIUS or LDAP.
This field is not available if you select the Ext-User user type.
Enter the password of this user account. It can consist of 4 - 30
alphanumeric characters.
This field is not available if you select the Ext-User user type. Enter
the password again.
Enter the description of each user, if any. You can use up to 60 printable
ASCII characters. Default descriptions are provided.
If you want to set authentication timeout to a value other than the
default settings, select Use Manual Settings then fill your preferred
values in the fields that follow.
Chapter 14 Object
Section 14.1 on page
), or dashes (-), but the first
_
358.
357), and
359