Chapter 15 AAA
15.3.2 Adding a RADIUS Server Member
Use this screen to create or edit a RADIUS server member. Click the Add icon or
an Edit icon in the Device Operation > Device Configuration > Object > AAA
Server > RADIUS > Group screen to display the screen as shown next.
Figure 180 Device Operation > Device Configuration > Object > AAA Server >
RADIUS > Group > Add/Edit
The following table describes the labels in this screen.
Table 163 Device Operation > Device Configuration > Object > AAA Server >
RADIUS > Group > Add/Edit
LABEL
Configuration
Name
Key
Timeout
Host Members
#
392
DESCRIPTION
All RADIUS servers in a group share the same settings in the fields
below.
Enter a descriptive name (up to 63 alphanumeric characters) for
identification purposes.
Enter a password (up to 15 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on
the external authentication server and the ZyWALL.
Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the
RADIUS server or the RADIUS server is down.
The ordering of the RADIUS servers is important as the ZyWALL uses
the RADIUS servers for user authentication in the order they appear
in this table.
This field displays the index number.
Vantage CNM User's Guide