Adding Virtual Interfaces - ZyXEL Communications Vantage CNM 2.3 User Manual

9.1.2 Adding Virtual Interfaces

This screen lets you configure IP address assignment and interface parameters for
virtual interfaces. To access this screen, click an Add icon next to an Ethernet
interface, VLAN interface, or bridge interface in the respective interface summary
screen.
Figure 106 Device Operation > Device Configuration > Network > Interface >
Ethernet > Add
Figure 107 Device Operation > Device Configuration > Network > Interface >
Ethernet > Add
Each field is described in the table below.
Table 98 Device Operation > Device Configuration > Network > Interface > Ethernet
> Add
LABEL
Virtual Interface Properties
Enable
Vantage CNM User's Guide
DESCRIPTION
Select this to enable this virtual interface. Clear this to disable this
virtual interface.
Chapter 9 Device Network Settings
255