ZyXEL Communications Vantage CNM 2.3 User Manual page 34

Chapter 2 GUI Introduction
The following table describes the labels in this screen.
Table 7 Configuration Screen: Device List
LABEL
LAN MAC
(Hex)
Device
Name
Device
Type
Firmware
Version
Synchroniz
e Type
Encryption
Methods
Encryption
Key
Syslog
Server IP
Device
Owner
Device
Login
Device
Login
Username
34
DESCRIPTION
Enter the LAN MAC address of the device (without colons) in this field.
Vantage CNM uses the MAC address to identify the device, so make sure it is
entered correctly.
Enter a unique name here for the device for identification purposes. The
device name cannot exceed ten characters.
Select the device type from the pull-down menu. The pull-down menu lists
only full functions supported device types (See table xxx). Select Unknown
if you cannot find your device model from the list.
This field is only available for a ZyNOS device. Select the firmware version
the device is currently using. The pull-down menu lists only supported
firmware versions. Select Unknown if you don't know the device's firmware
version or you cannot find your device's current firmware version from the
list.
Note: Not all ZyXEL devices can work with Vantage CNM. See Quick
Start Guide for the supported device models and firmware
versions.
Select Get configuration from the device if you want Vantage CNM to
pull all current device configurations into Vantage CNM. The current device
configuration "overwrites" Vantage CNM configurations.
Select Set Vantage CNM configuration to device if you want Vantage
CNM to push all current configurations from Vantage CNM to the device. The
current device configuration is then reset to the configuration settings in
Vantage CNM.
This field is only available for a ZyNOS device. The encryption options are
DES and 3DES. Choose from None (no encryption), DES or 3DES. The
device must be set to the same encryption mode (and have the same
encryption key) as the Vantage CNM server.
This field is only available for a ZyNOS device. Type an eight-character
alphanumeric ("0" to "9", "a" to "z" or "A" to "Z") for DES encryption and a
24-character alphanumeric ("0" to "9", "a" to "z" or "A" to "Z") for 3DES
encryption.
Select the IP address of the device's Vantage Report server, or, if the IP
address is not in the drop-down box, select User-Define and enter the IP
address. Leave the IP address blank if the device does not use a Vantage
Report server. See Section 30.6 on page
Select the owner's name of the device. You have to go to CNM System
Setting > Device Owner screen to add device owners first.
Select HTTPS to use HTTPS connection when login the device's web
configurator from Vantage CNM.
Select HTTP to use HTTP connection when login the device's web
configurator from Vantage CNM.
This field is only available for a ZLD device. Type the administrator's login
name of the device in this field.
571.
Vantage CNM User's Guide