ZyXEL Communications Vantage CNM 2.3 User Manual page 459

Click the Save as a BB icon to save the current configuration of the selected
device as a building block. The following pop-up screen appears.
Figure 231 Device Operation > License Management > Service Activiation >
Registration > Save as a BB
Enter the name of the new building block, and click Apply. The name must be 1-
32 alphanumeric characters or underscores (_). It cannot include spaces. The
name is case-sensitive.
The following table describes the labels in this screen.
Table 203 Device Operation > License Management > Service Activation >
Registration
LABEL
Device Registration /
General Settings
New myZyXEL.com
account
Existing
myZyXEL.com
account
User Name
Check
Password
Confirm Password
E-Mail Address
Country
Service Activation /
Trial Version
Activation
Content Filtering 1-
month Trial
Vantage CNM User's Guide
DESCRIPTION
If you select Existing myZyXEL.com account, only the User
Name and Password fields are available. Click Save as a BB to
save the current setting as a component building block.
If you haven't created an account at myZyXEL.com, select this
option and configure the following fields to create an account and
register your device.
If you already have an account at myZyXEL.com, select this option
and enter your user name and password in the fields below to
register your device.
Enter a user name for your myZyXEL.com account. The name
should be from six to 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Click this button to check with the myZyXEL.com database to
verify the user name you entered has not been used.
Enter a password of between six and 20 alphanumeric characters
(and the underscore). Spaces are not allowed.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.
Select your country from the drop-down box list.
These are trial service subscriptions. The trial period starts the day
you activate the trial. After the trial expires, you can buy an iCard
and enter the license key in the Device Operation > License
Management > Service Activation > Service screen to extend
the service.
Select the check box to activate a trial. The trial period starts the
day you activate the trial.
Chapter 19 License Management
459