Idp; General Setup - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 6 Device Security Settings
Table 60 Device Operation > Device Configuration > Security > Anti-Spam > Lists >
Add/Edit (continued)
LABEL
Subject
Apply
Cancel

6.7 IDP

This section shows you how to configure the IDP screens. These screens may vary
depending on which model you're configuring. Please see the device's User's Guide
for more information about any of these screens or fields.

6.8 General Setup

Use this screen to enable IDP on the device and choose what interface(s) you
want to protect from intrusions. To open this screen, click a device, click Device
174
DESCRIPTION
This field displays when you select the Subject type. Enter up to 63
ASCII characters of text to check for in the e-mail headers. Spaces are
allowed.
You can use a wildcard (*). For example, if you configure "*good", any
e-mail subject that ends in "good" matches. So "this is very good" and
"this is not so good" both match.
The wildcard can be anywhere in the text string and you can use more
than one wildcard. You cannot use two wildcards side by side, there
must be other characters between them.
The device can check up to the first 63 characters of an e-mail's subject.
The whitelist or blacklist check fails for subjects over 63 characters.
However, a whitelist or blacklist entry that uses some text followed by a
wildcard only requires the device to check the number of characters
before the wildcard. So the check would still work for subjects longer
than 63 characters. For example, if you used "abc*", the device would
only check up to the first three characters of the e-mail subject.
Click this to save your settings and exit this screen.
Click this to exit this screen without saving.
Vantage CNM User's Guide