ZyXEL Communications Vantage CNM 2.3 User Manual page 95

Table 25 Device Configuration > WAN > 3G(WAN2) (continued)
LABEL
Reset time and
data budget
counters
Actions when
over budget
Actions when
over % of time
budget or % of
data budget
Apply
Reset
Vantage CNM User's Guide
DESCRIPTION
This button is available only when you enable budget control in this
screen.
Click this button to reset the time and data budgets immediately. The
count starts over with the 3G connection's full configured monthly time
and data budgets. This does not affect the normal monthly budget
restart.
Specify the actions the selected device takes when the time or data limit
is exceeded.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you
select Log.
If you select Log, you can also select recurring every to have the
selected device send a log (and alert if selected) for this event
periodically. Specify how often (from 1 to 65535 minutes) to send the
log (and alert if selected).
Select Allow to permit new 3G connections or Disallow to drop/block
new 3G connections.
Select Keep to maintain the existing 3G connection or Drop to
disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the selected device allows you to
transmit data using the current connection, but you cannot build a new
connection if the existing connection is disconnected.
Specify the actions the selected device takes when the specified
percentage of time budget or data limit is exceeded. Enter a number
from 1 to 99 in the percentage fields. If you change the value after you
configure and enable budget control, the selected device resets the
statistics.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you
select Log.
If you select Log, you can also select recurring every to have the
selected device send a log (and alert if selected) for this event
periodically. Specify how often (from 1 to 65535 minutes) to send the
log (and alert if selected).
Click this to save your changes back to the Vantage CNM.
Click this to begin configuring this screen afresh.
Chapter 5 Device Network Settings
95