Configuring A Trunk - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 9 Device Network Settings

9.8 Configuring a Trunk

Click Device Operation > Device Configuration > Network > Interface >

Trunk and then the Edit icon to open the following screen. Use this screen to

configure load balancing settings for each interface.

Figure 128 Device Operation > Device Configuration > Network > Interface > Trunk

> Edit - Least Load First

Figure 129 Device Operation > Device Configuration > Network > Interface > Trunk

> Edit - Weighted Round Robin

Figure 130 Device Operation > Device Configuration > Network > Interface > Trunk

Vantage CNM User's Guide