ZyXEL Communications Vantage CNM 2.3 User Manual page 287

Table 112 Device Operation > Device Configuration > Network > Interface > PPP >
Edit > Configuration (continued)
LABEL
Nailed-Up
Dial-on-
Demand
Description
Base Interface
Account Profile Select the ISP account that this PPPoE/PPTP interface uses. The
Protocol
User Name
Service Name
ISP Setting
Protocol
Authentication
Type
User Name
Password,
Retype to
Confirm
Service Name
Vantage CNM User's Guide
DESCRIPTION
Select this if the PPPoE/PPTP connection should always be up. Clear
this to have the ZyWALL establish the PPPoE/PPTP connection only
when there is traffic. You might use this option if a lot of traffic needs
to go through the interface or it does not cost extra to keep the
connection up all the time.
Select this to have the ZyWALL establish the PPPoE/PPTP connection
only when there is traffic. You might use this option if there is little
traffic through the interface or if it costs money to keep the
connection available.
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
up to 60 characters long.
This field is read-only and displays the name of the interface upon
which this PPP interface is built.
dropdown box lists ISP accounts by name. You can configure ISP
accounts in the Device Operation > Device Configuration >
Object > ISP Account screen.
This field is read-only. It displays the protocol specified in the ISP
account.
This field is read-only. It displays the user name for the ISP account.
This field is read-only. It displays the PPPoE service name specified in
the ISP account. This field is blank if the ISP account uses PPTP.
Select the protocol that your ISP uses for the account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
Chap/PAP - The ZyWALL accepts either CHAP or PAP when
requested by this remote node.
Chap - The ZyWALL accepts CHAP only.
PAP - The ZyWALL accepts PAP only.
MSCHAP - The ZyWALL accepts MSCHAP only.
MSCHAP-V2 - The ZyWALL accepts MSCHAP-V2 only.
This field is read-only. It displays the user name for the ISP account.
Type your password. Then re- to make sure that you have entered is
correctly.
This field is optional. It displays the PPPoE service name specified in
the ISP account. This field is blank if the ISP account uses PPTP.
Chapter 9 Device Network Settings
characters, and it can be
287