Chapter 6 Device Security Settings
Table 50 Device Operation > Device Configuration > Security > VPN > VPN Rules
(IKE) > Gateway Policy Add/Edit
LABEL
Peer ID Type
144
DESCRIPTION
Select from the following when you set Authentication Key to
Pre-shared Key.
•
Select IP to identify the remote IPSec router by its IP address.
•
Select DNS to identify the remote IPSec router by a domain
name.
•
Select E-mail to identify the remote IPSec router by an e-mail
address.
Select from the following when you set Authentication Key to
Certificate.
•
Select IP to identify the remote IPSec router by the IP address
in the subject alternative name field of the certificate it uses for
this VPN connection.
•
Select DNS to identify the remote IPSec router by the domain
name in the subject alternative name field of the certificate it
uses for this VPN connection.
•
Select E-mail to identify the remote IPSec router by the e-mail
address in the subject alternative name field of the certificate it
uses for this VPN connection.
•
Select Subject Name to identify the remote IPSec router by the
subject name of the certificate it uses for this VPN connection.
•
Select Any to have the device not check the remote IPSec
router's ID.
Vantage CNM User's Guide