ZyXEL Communications Vantage CNM 2.3 User Manual page 406

Chapter 16 Maintenance
The following table describes the labels in this screen.
Table 172 Maintenance > Log > Log Setting
LABEL
Log Settings for Remote Server X
Active
Log Format
Server
Address
Log Facility
Active Log
Log
Category
Selection
Apply
Reset
406
DESCRIPTION
Select this check box to send log information according to the
information in this section. You specify what kinds of messages are
included in log information in the Active Log section.
This field displays the format of the log information. It is read-only.
ZyXEL VRPT - ZyXEL's Vantage Report, syslog-compatible format.
Type the server name or the IP address of the syslog server to which to
send log information.
Select a log facility. The log facility allows you to log the messages to
different files in the syslog server. Please see the documentation for your
syslog program for more information.
This field displays each category of messages. It is the same value used
in the Display and Category fields in the View Log tab. The Default
category includes debugging messages generated by open source
software.
Select what information you want to log from each Log Category
(except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - log regular information and
alerts from this category
enable normal logs and debug logs (yellow checkmark) - log regular
information, alerts, and debugging information from this category
If you check one of the check boxes for All Logs, it affects the settings
for every category.
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
Vantage CNM User's Guide