ZyXEL Communications Vantage CNM 2.3 User Manual page 382

Chapter 14 Object
(see Section 14.7 on page
the Recurring section.
Figure 174 Device Operation > Device Configuration > Object > Schedule > Edit
(Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are
disabled in this screen. The following table describes the remaining labels in this
screen.
Table 157 Device Operation > Device Configuration > Object > Schedule > Edit
(Recurring)
LABEL
Configuration
Name
Day Time
Start
382
379), and click either the Add icon or an Edit icon in
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-
31 alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Type the hour and minute when the schedule begins each day.
Year - disabled
Month - disabled
Day - disabled
Hour - 0 - 23
Minute - 0 - 59
The Hour and Minute fields are both required.
To set all day (24 hours), configure the start hour and minute both to 0.
), or dashes (-), but the first
_
Vantage CNM User's Guide