Address Group Add/Edit Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

14.4.3 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group

or edit an existing one. To access this screen, go to the Address Group screen

Section 14.4.2 on page

Figure 167 Device Operation > Device Configuration > Object > Address > Group >

The following table describes the labels in this screen.

Table 150 Device Operation > Device Configuration > Object > Address > Group >

Vantage CNM User's Guide

371), and click either the Add icon or an Edit icon.

Enter a name for the address group. You may use 1-31 alphanumeric

characters, underscores(

be a number. This value is case-sensitive.

This field displays the description of each address group, if any. You can

use up to 60 characters, punctuation marks, and spaces.

This field displays the names of the address and address group objects

that can be added to the address group.

Select address and address group objects that you want to be members

of this group and click the select arrow to add them to the member list.

This field displays the names of the address and address group objects

that have been added to the address group. The order of members is not

important. To remove members, select them and click the deselect

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving your changes.

), or dashes (-), but the first character cannot

Chapter 14 Object