ZyXEL Communications Vantage CNM 2.3 User Manual page 175

Operation in the menu bar and then click Device Configuration > Security >
IDP > General in the navigation panel.
Figure 69 Device Operation > Device Configuration > Security > IDP > General
The following table describes the labels in this screen.
Table 61 Device Operation > Device Configuration > Security > IDP > General
LABEL
General Setup
Enable Intrusion
Detection and
Prevention
Turbo Card
Vantage CNM User's Guide
DESCRIPTION
Select this check box to enable IDP on the device. When this check
box is cleared the device is in IDP "bypass" mode and no IDP checking
is done.
This field displays whether or not a device's Turbo Card is installed.
Note: You cannot configure and save the IDP or Anti-Virus
screens if the device's Turbo Card is not installed.
Chapter 6 Device Security Settings
175